What is the Casimir force? The Casimir force is a QV phenomenon such that two flat plates placed in close proximity in the vacuum preclude the appearance of particles, whose wavelength is larger than the separation gap, and the resultant negative pressure between the two surfaces is more negative than the pressure outside the two surfaces, hence they experience an attractive force.
Using the Plank frequency as upper cutoff yields a prediction of ~10^114 J/m3. Current astronomical observations put the critical density at 1*10^-26 kg/m3. The vast difference between QED prediction and observation is not currently understood.
What is the dynamic Casimir force? The magnitude of thrust arising from using the dynamic Casimir force derived numerous times in the literature has been shown to be very small in comparison with conventional propulsion systems, but has been clearly shown to be theoretically possible The dynamic Casimir force arises as a result of Unruh radiation where an accelerated observer sees the vacuum as a higher temperature photon bath, and is the mechanism that facilitates Hawking radiation around a black hole where relativistic acceleration separates a virtual pair such that one particle goes in the horizon, while the other escapes. The simplest mechanical construct to help visualize using the dynamic Casimir force to generate thrust is through the use of vibrating mirrors where the mirror trajectory is designed to generate radiation in a preferred direction. Recent findings reported earlier in 2011 show that the dynamic Casimir effect may have been detected in the lab.
Recent models developed by White suggests that there are ways to increase the net force, and these models have been validated against data at both the cosmological scale, the quantum level, and test devices have been fabricated/ tested in the lab and found to agree with model predictions.
The near term focus of the laboratory work is on gathering performance data to support development of a Q-thruster engineering prototype targeting Reaction Control System (RCS) applications with force range of 0. The team is maintaining a dialogue with the ISS national labs office for an on orbit DTO Up first will be testing of a refurbished test article to duplicate historical performance on the high fidelity torsion pendulum (1-4 mN at 10-40 W). 3-3 kW. 1-1 N with corresponding input power range of 0.
In 70 days, the same system could reach the orbit of Saturn Making minimal extrapolation of performance, assessments show that delivery of a 50 mT payload to Jovian orbit can be accomplished in 35 days with a 2 MW power source [specific force of thruster (N/kW) is based on potential measured thrust performance in lab, propulsion mass (Q-thrusters) would be additional 20 mT (10 kg/kW), and associate power system would be 20 mT (10 kg/kW)]. Q-thruster performance allows the use of nuclear reactor technology that would not require MHD conversion or other more complicated schemes to accomplish single digit specific mass performance usually required for standard electric propulsion systems to the outer solar system. How would Q-thrusters revolutionize human exploration of the outer planets?